3U Rack fitted with 2 horizontal 1084 Modules

Two 1084 modules mounted horizontally in a 3U, 19" rack-mounting unit.

Neve Channel Amplifiers are designed to accept signals from microphone and line sources. Low noise and distortion and generous overload performance are important features of these amplifiers. These modules are the same as the original designs and contain all of the original components.

The 1084 channel amps were used to provide the Mic/Line amp and EQ sections in classic Neve consoles such as the 8014, 8018, 8028, 8024, 8026 and also in the 5003 and 5004 broadcast consoles.

1084 Channel Amplifiers Based on the same technology as the 1073s, the 1084s also deliver the unique sound and quality of Neve. The 1084s offer additional features including 3 switchable EQ bands with cut and boost, a high Q for presence and low pass/high pass filters.

1084 EQ SECTION:

HIGH FREQUENCY:

Smooth /-16dB shelving wit selectable frequencies of 10kHz, 12kHz and 16kHz.

LOW FREQUENCY:

Smooth /-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz.

MID FREQUENCY:

Smooth /-12dB or /-18dB peaking with switchable 'High Q', selectable centre.

Frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz.

HIGH PASS FILTER:

18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz & 360Hz.

LOW PASS FILTER:

18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz, & 18kHz.

EQL BUTTON:

Switches the equaliser in or out of circuit.

PHASE BUTTON:

Gives 180Â Phase change at Balanced Output.

MICROPHONE INPUT:

Input impedance 300W or 1200W, gain 80db to 20dB in 5dB steps.

LINE INPUT:

Input impedance 10,000W bridging, gain 20dB to -10dB in 5dB steps.

Both inputs are transformer balanced and earth free.

OUTPUT:

Maximum output is > 26dBu into 600W. Output impedance is 75W @1kHz.

Output is transformer balanced and earth free.

DISTORTION:

Not more than 0.07% from 50Hz to 10kHz at 20dBu output (80kHz bandwidth) into 600W.

FREQ RESPONSE:

/-0.5dB 20Hz to 20kHz, -3dB at 40kHz. EQ Out.

NOISE:

Not more than -83dBu at all Line gain settings EQ In/Out (22Hz to 22kHz bandwidth).

EIN better than -125dBu @ 60dB gain.