1 3
PMC

PMC8-2 SUB-L

$7,900.00 CAD
Demande de devis – Réservé aux revendeurs agréés

Description

The PMC 8-2 SUB is a true low-frequency monitor like the PMC8 SUB and offering the same DSP engine and seamless integration with surround and immersive systems, the PMC8-2 SUB betters the spec of its smaller sibling, offering higher maximum SPL output down to 25Hz.

With the same dimensions as the PMC8-2 midfield monitor, the PMC8-2 SUB's twin eight-inch bass drivers are powered by independent 400W Class-D amplifiers. The same configuration options are available as on the PMC8 SUB, likewise accessible on the speaker's rear panel or by using the browser-based SoundAlign™ software via a LAN-connected tablet, smartphone or computer.

The PMC8-2 SUB can be used as a standalone subwoofer for multichannel and immersive sound systems, or as an XBD cabinet with either PMC6-2 or PMC8-2 s, creating a system of awesome power and dynamic range. The sub is available in either left- or right-handed cabinet versions (PMC8-2 SUB-L or PMC8-2 SUB-R), to allow placement of the bass drivers on the outside edges of a stereo array, matching the arrangement of the main monitors.

Caractéristiques

Active subwoofer with twin 8-inch bass drivers and ATL bass loading

Frequency response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis)

Max. cont. SPL: 115dB @1m (quarter space value calculated as +3dB from half space measurement.

Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

State-of-the-art Class-D amplifier: 2 x 400W

Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)

Digital ‘through' output (AES3 24-bit, 96kHz)

SoundAlign network control interface for single or group EQ & settings

Sophisticated DSP driver protection, EQ, and delay/phase options

Dedicated XBD configuration mode

Spécifications

Type:


Active subwoofer with twin 8-inch bass drivers and ATL bass loading

Drive Unit Complement:


LF PMC 200mm (8") studio 8 driver

Effective ATL Length:


3m (9.8ft)

Frequency Response:


25Hz - 500Hz (- 3dB) (@1m full space, on-axis)

Sensitivity:


+4dBu input signal = 98dB SPL @ 1m

Max continuous SPL:


115dB @1m
(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Max Peak SPL:


121dB @1m
(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Input:


XLR switchable between analogue & digital AES3
Analogue input
- +20/+24dBu max. input level (selectable)
- 22K ohm input impedance Digital input - 16/24-bit AES3 signal, left, right or left + right
- 18 - 192kHz Sample Rate
- 110 ohm input impedance Expansion card slot
- For future connectivity upgrades

Output:


XLR digital AES3 (fixed 24-bit @ 96kHz)
Network RJ45 for use with PMC SoundAlign web interface

Features:


Level Trim (+/-10dB)
High-pass/Low-pass filter (20 - 200Hz, 12dB/Oct)
Delay (0 - 30mS)
Phase (normal or inverted)
LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)
User presets (3 + factory defaults)

Latency:


2.4mS

Amplifier power per channel:


300Wrms

Mains:


100 - 240VAC auto-switching, 50-60Hz (IEC C14)

Power consumption (idle):


25W

Power consumption (max):


300W

Cabinet dimensions:


H 266mm (10.5")
W 551mm (21.7")
D 440mm (17.3")

Weight:


18.5kg (40.8lbs) each

Available Finishes:


Studio black